Phoenix Axial Air Mover

The Phoenix Axial Air Mover is the industry’s only air mover specifically engineered with patent pending FOCUS™ Technology. FOCUS Technology revolutionizes evaporative drying by producing air velocities greater than competitive products and focusing those velocities on hard-to-dry areas such as carpet and pad, sub-floor and walls.

The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, FCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box.

Performance

Greater air velocities than competitive products
Focused velocities 0 to over 23.5 feet
Directs air flow towards problematic corners, where the wall meets the floor
Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage
3000 cfm
Long-life 2-speed motor
Low noise, quiet operation

Packaging

Lightweight and compact linear low density polyethylene (LLDP) housing is washable, chemical resistant and stacks for storage
Colored Restoration Red for high visibility
Ergonomic handle

Features

Power-on indicator light
Automatic hour meter displays site run time
On-board power management:
- Circuit breaker protects air mover and attached devices and prevents nuisance visits to the junction box
- GFCI protection promotes operator safety in wet applications
- Duplex AC outlet allows daisy chaining of up to four axial air movers
20 ft AC cord with cord management
Units interlock for ease of stacking during storage and handling
Weighs 2.5 lbs less than competitive units

Phoenix Axial Air Mover Specifications

Part No.:	4025200
Drive Motor:	1/4 hp 1-phase 110/120 VAC 2-speed 4-pole, PSC Electric Motor
CFM:	Approximately 3000
Cord:	20 ft Power Cord
Outlet:	15A UL Rated GFCI Duplex Receptacle
Current Draw:	2.5 Amps
Voltage:	115 VAC
Warranty:	Year One - 100% parts and labor (all components); Year Two - 100% parts only (all components); Year(s) Three through Seven - Only materials and workmanship of the housing are covered

Dimensions

	Machine	Shipping
Width:	19.9"	19.25"
Height:	19.5"	20"
Depth:	15.2" (intake to exhaust)	15.5"
Weight:	29.5 lbs	32.7 lbs

Literature (PDF)