Phoenix Focus Axial Air Mover
ETL Logo


Part Numbers

4025200 (Red)
4030680 (Blue)


Current Draw: 2.5 Amps (High Speed)
Voltage: 115 VAC, Grounded

Drive Motor

1/4 Hp 1-Phase 110/120 VAC 2-Speed 4-Pole, PSC Electric Motor


Approximately 3,000 CFM


15A UL Rated GFCI Duplex Receptacle

Cord Length

25’ Power Cord

Unit Dimensions

Width: 19.125”
Height: 19.5”
Depth: 15.2”
Weight: 29.5 Lbs.



Phoenix FOCUS™ Axial Air Mover

The Phoenix Axial Air Mover is the industry’s only air mover specifically engineered with patented FOCUS Technology. FOCUS Technology revolutionizes evaporative drying by producing CFM greater than competitive products and focusing all of its CFM on hard-to-dry areas such as carpet and pad, subfloor and walls.

The Phoenix Axial Mover operator interface is conveniently located for easy access, featuring: power indicator lamp, three-position switch, hour meter, GFCI outlet, and circuit breaker, eliminating nuisance trips to the breaker box.



  • Greater air velocities than competitive products
  • Focused velocities 0 to over 23.5 feet
  • Directs air flow towards problematic corners, where the wall meets the floor
  • Capable of reducing secondary damage claims stemming from the side-effects of trapped humidity like fungi, mold, mildew or structural damage
  • 3,000 cfm
  • Long-life 2-speed motor
  • Low noise, quiet operation