Phoenix Stackable CAM Spec Sheet ▼ Phoenix Stackable CAM Pro Manual ▼ Specifications Part Number 4030990 Power Current Draw: 2.6 Amps (High Speed) Voltage: 115 VAC, Grounded Drive Motor 1/3 Hp 1-Phase 110/120 VAC 2-Speed Thermal Cut-Off CFM 1,050 CFM Outlet 15A UL Rated GFCI Duplex Receptacle Cord Length 25’ Power Cord Unit Dimensions Width: 17.25” Height: 20” Depth: 19.4” Weight: 27 Lbs. MSRP $395 All Air Movers ▶ For Info on the Stackable CAM 50Hz ▶ Phoenix Stackable CAM Pro Lower Amps, Higher CFM, Stacks 4 High – The Stackable CAM Pro From Phoenix The Phoenix Stackable CAM Pro utilizes an innovative stable, stackable design. With multiple contact points and interlocking side grills, the Phoenix Stackable CAM Pro can be stacked safely and securely up to 4 units high, freeing up valuable space in your trucks and warehouses. The Phoenix Stackable CAM Pro features a unique 1/3 horsepower motor design and proprietary blower technology, that provides more airflow, higher static pressure, and lower amp draw. At 1,050 CFM, over 2,800 FPM, and using only 2.6 amps the Phoenix Stackable CAM Pro delivers 12% more CFM, while drawing 35% less electricity than the leading competitive centrifugal on both High Speed and Low Speed (2.0 amps on low). With the low amp draw and onboard GFCI, the Phoenix Stackable CAM Pro gives you maximum airflow on a circuit, allowing up to 4 CAMs on a standard 15 amp household circuit (or up to 6 on low speed). The Phoenix Stackable CAM Pro housing is durable, washable, and chemical resistant. It features multiple operating positions of horizontal, vertical, and 45-degree angles. Like all Phoenix air movers, the Stackable CAM Pro is ETL Listed and UL Certified. The Phoenix Stackable CAM Pro is lightweight and properly balanced for easy handling and features the additional convenience features of a lighted plug for confirming power at the outlet and superior cord management for better packing and storage.